Sennheiser LV308 - Manual (Page 47)

47
Adjustment tips for the operating menu
DISPLY Selecting the standard display
Via the “ DISPLY ” menu, you can select the standard display:
NAME Entering a name
Via the “ NAME ” menu, you can enter a freely selectable name for
the transmitter. The name can be displayed on the standard display
and can consist of up to six characters such as:
y letters (without pronounciation marks),
y numbers from 0 to 9,
y special characters e.g. () - . _ and spaces.
To enter a name, proceed as follows:
After you have entered into the setting mode of the menu, the first
segment starts flashing on the display.
̈ With the ̆ / ̄ buttons you can now select a character. By briefly
pressing a button, the display jumps either forwards or back-
wards to the next character. If you hold down a button, the dis-
play starts cycling continuously.
̈ Press the SET button to change to the next segment and select
the next character.
̈ Have you entered the name completely? Press the SET button to
store your setting and to return to the top menu level.
RESET Loading the factory-preset default settings
Via the “ RESET ” menu, you can load the factory-preset default set-
tings. Only the selected setting for the pilot tone remains
unchanged. After the reset, the transmitter is restarted and the
standard display is shown on the display panel.
Selectable
standard display Contents of standard
display
“ FREQ “
“ NAME “
“ CHAN “