Sony 3-283-045-11(1) User Manual

Page 110

Advertising
background image

110

GB

Dimensions (approx.)

385 mm × 50 mm × 67 mm
(w/h/d)

Mass (approx.)

0.4 kg

Surround (SS-TS84)

Speaker system

Full range Bass reflex,
Magnetically Shielded

Speaker unit

65 mm cone type

Rated impedance

3 ohms

Dimensions (approx.)

113 mm × 830 mm × 84
mm (w/h/d)
315 mm × 1,015 mm -
1,335 mm × 315 mm (w/h/
d) with stand

Mass (approx.)

1.7 kg
3.6 kg with stand

Subwoofer (SS-WS83)

Speaker system

Subwoofer Bass reflex

Speaker unit

160 mm cone type

Rated impedance

1.5 ohms

Dimensions (approx.)

205 mm × 325 mm × 325
mm (w/h/d)

Mass (approx.)

5.2 kg

General

Power requirements

220 V - 240 V AC,
50/60 Hz

Power consumption

On: 130 W
Standby: 0.3 W (at the
Power Saving mode)

Output voltage (DIGITAL MEDIA PORT)

DC 5 V

Output current (DIGITAL MEDIA PORT)

700 mA

Dimensions (approx.)

430 mm × 66 mm × 385
mm (w/h/d) incl.
projecting parts
430 mm × 66 mm × 415
mm (w/h/d) with the
wireless transceiver
inserted

Mass (approx.)

4.3 kg

Surround amplifier (TA-SA100WR)

Amplifier Section
Stereo mode (rated)

80 W + 80 W (at 3 ohms, 1
kHz, 1 % THD)

Surround mode (reference) RMS output power

143 W (per channel at 3
ohms, 1 kHz, 10 % THD)*

* Depending on the source, there may be no sound

output.

Rated impedance:

3 - 16

Ω

General
Power requirements

220 V - 240 V AC,
50/60 Hz

Power consumption

On: 50 W

Dimensions (approx.)

85 mm × 100 mm × 330
mm (w/h/d) (incl. EZW-
RT10)
85 mm × 100 mm × 345
mm (w/h/d) incl. speaker
cord cover and speaker
cord holder

Mass (approx.)

1.7 kg incl. speaker cord
cover and speaker cord
holder

Wireless transceiver (EZW-RT10)

Communication system

S-AIR Specification
version 1.0

Output

12.0 mW

Frequency band

2.4000 GHz - 2.4835 GHz

Modulation method

DSSS

Power requirements

DC 3.3 V, 350 mA

Dimensions (approx.)

50 mm × 13 mm × 60 mm
(w/h/d)

Mass (approx.)

24 g

Design and specifications are subject to change
without notice.

• Standby power consumption 0.3 W.

• Halogenated flame retardants are not

used in the printed wiring boards.

• Over 85% power efficiency of

amplifier block is achieved with the
full digital amplifier, S-master.

Advertising
This manual is related to the following products: