Sony 3-283-045-11(1) - Manual (Page 32)

32 GB
Gettin
g
Star
ted
Step 6: Enjoying Sound
from all the Speakers
You can enjoy DVD, TV, or VCR sound from
all the speakers in this system.
1
Press FUNCTION +/– repeatedly until
the desired function appears in the
front panel display.
Each time you press FUNCTION +/–, the
function changes as follows.
“DVD” t “TUNER FM” t “TUNER
AM” t “USB” t “TV” t “LINE” t
“DMPORT” t “AUDIO” t …
Note
• When you use the TV (COAXIAL or OPTICAL
DIGITAL IN) jack (digital connection), the
digital connection takes priority.
2
Press SYSTEM MENU.
3
Press X/x repeatedly until “DEC.
MODE” appears in the front panel
display, then press
or c.
4
Press X/x repeatedly until the
decoding mode you want appears in
the front panel display.
When you want to output the TV sound or
stereo sound of a 2 channel source from the
six speakers, select the “PRO LOGIC,”
“PLII MOVIE,” or “PLII MUSIC”
decoding mode.
For details, see page 34.
5
Press .
The setting is made.
6
Press SYSTEM MENU.
The system menu turns off.
Note
• Depending on your TV, you may need to turn off your
TV’s speaker to enjoy surround sound of the system.
Tip
• When listening to audio files using a portable audio
source, you can enhance the sound.
Press FUNCTION +/– to select “AUDIO.” Connect
the portable audio source. Select “A.F.D. STD” for
“DEC. MODE” and set the sound mode (page 36) to
“MOVIE,” “MUSIC,” or “NEWS.”
To cancel, select other than “A.F.D. STD.”
Distortion may occur when you listen to a
component connected to the EURO AV T
OUTPUT (TO TV), LINE jacks on the rear
panel, or to the AUDIO IN jack on the front
panel. Distortion is not a malfunction and will
depend on the component connected.
To prevent distortion, reduce the input level on
the unit.
Function Source
“DVD” Disc that is played by the
system
“TUNER FM”/
“TUNER AM” FM/AM radio (page 64)
“USB” USB device (page 71)
“TV” TV
“LINE” Component that is
connected to the LINE
jacks on the rear panel
“DMPORT” DIGITAL MEDIA PORT
adapter (page 80)
“AUDIO” Portable audio source (that
is connected to the AUDIO
IN jack on the front panel)
SYSTEM
MENU
X/x/c,
FUNCTION
+/–
Changing the input level of the
sound from connected
components