Superior VF4000-CHP-2 User Manual

Page 10

Advertising
background image

NOTE: DIAGRAMS & ILLUSTRATION NOT TO SCALE.

10

Grounded

to Appliance

Blower Motor

Motor Plug

Receptacle

120V

Appliance Junction Box

Figure 20

Brass Louver Kit

Brass louvers are available for use with these

appliances. These louvers are designed to

replace the standard black louvers that are

provided with the appliance. The brass louver

kit includes six (6) louvers that simply snap

into place. They provide a touch of elegance to

the VF appliance. This kit can be retrofitted to

previously installed appliances.

Brass Square Surround Kit

A decorative brass square surround kit is

available for use with these appliances. The

BSK-5 is designed to attach directly to the

front face of the appliance at its extreme edges.

The BSK-5 provides a picture frame finish for

the appliance 2-1/2" wide. The brass square

surround kit can be retrofitted onto previously

installed appliances.

Square Trim Kit

A square trim kit is available for use with this

appliance. This kit is easy to install and does

not require hardware to attach it as de-

signed, directly to the standard door frame.

The four piece square trim kit can be in-

stalled without the bottom or bottom and

side pieces to customize the look of our

appliance. This kit can be retrofitted to

previously installed appliances.

OPTIONAL EQUIPMENT

An incomparable package of options are avail-

able for use with these appliances. These op-

tions can both customize the operation of these

unique appliances and enhance their beauty

and charming appeal. All options are available

in kit form, are easy to install and are packaged

complete with all required parts and instruc-

tions. Some of the option kits need to be fitted

prior to completing the installation of the appli-

ance. The following paragraphs detail the kit

options available for use with the appliances

covered in this manual.

These outstanding optional items can be added

individually or in sets of two or more to custom-

ize your vent-free appliance to fit your homes

unique needs. Kit part numbers are provided

on page 12 along with descriptive illustrations.

The appliances covered in this manual are

heater rated and produce a great deal of heat.

Decorative brass trim pieces and hoods may

tarnish because of their proximity to the heater

opening and front face. Tarnishing of these

pieces is normal, unavoidable and should be

expected.

Forced Air Kit

The FAB-1100 assembly provides a forced air

circulation feature for your appliance. This kit

mounts directly into the lower intake chamber

with an electrical connection made at the recep-

tacle provided. The appliance must have an

independent 120Vac power line incorporated at

the time of installation. Refer to Step 5 of the

installation instructions supplied with the forced

air kit (

Figures 19 and 20 ).

Figure 19

Decorative Volcanic Stone

The decorative volcanic stone, Model FDVS,

can be used to enhance the look of your

appliance. Spread the decorative volcanic stone

evenly around the bottom of the firebox.

Refractory Liner Kit

One of the most beautiful enhancements you

can make to this appliance is the addition of

refractory liners. The refractory liner kit in-

cludes tan ceramic fiber panels for the rear and

side walls of the firebox. The ceramic fiber

panels have brick-like features in relief. To

install the three panels, simply place them in

position against the firebox walls. This kit can

be retrofitted into previously installed appli-

ances.

Screen Panel Kit

An optional fixed fine mesh screen panel can be

installed on the VF4000 Series Units. This screen

panel is easy to install. This kit can be retrofitted

to previously installed VF4000 appliances.

Gas Flex Line with Valve

A gas flex line kit is available to aid in attaching

the appliance to the gas supply. This kit can

only be used where local codes permit. The kit

includes a 1/2" NPT to 3/8" flare in line shut-off

valve, a 12" flex line 3/8" female flare through

and a 3/8" flare to 3/8" NPT fitting. The compo-

nents of this kit are rated for both natural and

propane gas. This kit is designed to be used as

an aid in installing the appliance.

WARNING: CHILDREN AND ADULTS

SHOULD BE ALERTED TO THE HAZARDS

OF HIGH SURFACE TEMPERATURES. USE

CAUTION AROUND THE APPLIANCE TO

AVOID BURNS OR CLOTHING IGNITION.

YOUNG CHILDREN SHOULD BE SUPER-

VISED WHEN THEY ARE IN THE SAME

ROOM AS THE APPLIANCE.

Advertising
This manual is related to the following products: