Selecting the automatic operation mode – Samsung AFPCC052CA0 User Manual
Page 12
Selecting the Automatic Operation Mode
In the Automatic mode, the room temperature and the fan speed are
controlled automatically.
1
To select the AUTO mode, press the Mode button until is displayed
at the top of the wireless remote controller.
Result:
◆
The indoor unit beeps.
◆
The air conditioner runs in AUTO mode.
N
N
N
N
o
o
o
o
tt
tt
e
e
e
e
You can change modes at any time.
2
If necessary, press (ON/OFF) button.
Result:
◆
The On/Off indicator on the indoor unit comes on.
◆
The air conditioner runs in the mode selected when
the unit was last used.
◆
The indoor unit beeps.
The air conditioner is fitted with a protection mechanism to
prevent the unit from being damaged when it is started
immediately after being:
◆
Plugged in
◆
Stopped
lt will start up normally after three minutes.
IM
PORTANT
To adjust the temperature, press the Temperature buttons one or more
times until the required temperature is displayed. Possible temperatures are
between 65
O
F and 86
O
F inclusive.
Result:
◆
Each time you press Temperature buttons:
- The temperature is adjusted by 1
O
F.
◆
The air conditioner starts cooling, provided that the room
temperature is higher than the selected temperature.
The quantity of air is adjusted automatically.
3
E-
12