Savin 2513f - Manual (Page 36)

Basic Functions
23
2
Basic Functions
Note
❒ You can select functions to be acti-
vated when System Reset is turned
on, when Energy Saver is turned
off, or after the machine is pow-
ered on. See p.56 “Settings You
Can Change with the User Tools”.
❒ You can change default settings for
basic functions. See p.56 “Settings
You Can Change with the User
Tools”.
Adjusting Copy Image Density
You can adjust the copy image densi-
ty to match your originals.
If you require darker or lighter cop-
ies, adjust the image density yourself.
AAAA
Press the
{{{{Lighter}}}} or {{{{Darker}}}} key
to adjust the image density.
Selecting an Original Type
There are two ways to match your
originals:
❖ ❖ ❖ ❖ Text
If you do not select either mode,
your originals will be scanned
with the settings suitable for text
originals with this mode.
❖ ❖ ❖ ❖ Photo
Delicate tones of photographs and
pictures can be reproduced with
this mode.
Note
❒ You can change the detailed set-
tings for Text and Photo each with
the User Tools. See p.56 “Settings
You Can Change with the User
Tools”.
AAAA
Press the
{{{{Original}}}} key, and then
select the original type.
Note
❒ Press the {{{{Original}}}} key to step
through the following types:
Upper indicator lit Text
Lower indicator lit Photo