Sony CMT-EP707 - Manual (Page 13)

Tape
13 GB
Tape
Loading a tape
1
Press Z PUSH OPEN/CLOSE.
2
Insert a tape in deck with the side you
want to play/record facing up.
Playing a tape
You can use TYPE I (normal), TYPE II (CrO
2
)
or TYPE IV (metal) tape.
1
Load a recorded tape.
2
Press TAPE.
3
Press FM MODE/DIR (REPEAT/DIR on
the remote) repeatedly to select
g to
play one side, h to play both sides, or
j * to play both sides repeatedly.
* The tape automatically stops after playing
back five times.
4
Press nN .
Press nN again to play the reverse side.
To
Stop play
Pause
Fast-forward or rewind
Remove the cassette
Insert with the side
you want to play/
record facing up.
Do this
Press x.
Press X.
Press again to resume play.
With the tape stopped, turn
m/M clockwise or
counterclockwise (or press
m or M on the remote).
Press Z PUSH OPEN/
CLOSE.
Finding the beginning of a
track (AMS*)
During playback, turn ./> clockwise or
counterclockwise (or press . or > on
the remote).
The tape is wound or rewound to the beginning
of the next or current track, and play will start
automatically. The search direction, “>> + 1”
(forward) or “<< – 1” (back) appears in the
display.
* AMS (Automatic Music Sensor)
Note
The AMS function may not operate correctly under
the following circumstances:
– When the unrecorded space between tracks is less
than 4 seconds long.
– When the system is placed near a television.
Tape