Recording to a tape – Sony CMT-EP707 User Manual

Page 14

Advertising
background image

14

GB

Steps

Recording from a CD

(CD Synchro Recording)

Recording from the radio

(or a connected component) manually

1

Load a blank tape.

2

Press DISC 1 – 3

Z

.

3

Load the CD you want to record.

4

Press

z

REC PAUSE/START.

The deck stands by for recording.

When you want to record on the reverse side, press nN.

5

Press FM MODE/DIR (REPEAT/DIR on the remote) repeatedly to select

g

to

record on one side,

h

to record on both sides.

6

Press

z

REC PAUSE/START again.

Recording starts.

Recording to a tape

— CD Synchro Recording/Recording Manually

You can record from a CD or radio (or connected components). You can use TYPE I (normal) tape.

To stop recording

Press x.

Tips

• When you record on both sides, be sure to start

from the top side. If you start from the bottom side,
recording stops at the end of the bottom side.

• For recording from the radio:

If noise is heard while recording from the radio,
move the respective antenna to reduce the noise.

Note

To erase a recording, remove all the CDs, press CD,
and then press z REC PAUSE/START twice.

Press TUNER (TUNER/BAND on the
remote) or MD to select the desired
source to record.

Tune in the radio station (or load
another audio source) you want to
record.

Press

z

REC PAUSE/START again, and

then start playing the desired source.

Advertising
This manual is related to the following products: