Smeg SE60X - Manual (Page 7)

Instructions for the installer
17
9.
INSTALLATION
9.1 Technical information
Hob type See rating plate
Electrical connections 220-240V~ 50Hz/380-415V 2N
∼ 50Hz/380-415V 3N∼ 50Hz
HOB RATING Electric
Maximum electrical power See rating plate
DIMENSION OF THE HOB
Width (mm) 595
Depth (mm) 510
9.2
The rating plate
Make sure that the voltage and capacity of the
power line conform to the data shown on the plate
located under the casing. Do not remove this
plate for any reason.
9.3 Electrical connection
IT IS OBLIGATORY FOR THE ELECTRICAL SYSTEM TO BE GROUNDED ACCORDING TO THE
METHODS REQUIRED BY SAFETY RULES.
IMMEDIATELY AFTER INSTALLATION CARRY OUT A BRIEF INSPECTION TEST OF THE HOB,
FOLLOWING THE INSTRUCTIONS. IF THE HOB FAILS TO OPERATE, AFTER CHECKING THAT
YOU HAVE CARRIED OUT THE INSTRUCTIONS CORRECTLY, DISCONNECT THE APPLIANCE
FROM THE ELECTRICAL MAINS AND CONTACT YOUR NEAREST SERVICE CENTRE.
NEVER ATTEMPT TO REPAIR THE APPLIANCE.
The manufacturer declines all responsibility for damage to persons or things caused by non-
observance of the above prescriptions or by interference with any part of the appliance.
Serial number
Model