Rear panel – SECO-LARM USA H.264 Network DVR DR-116Q User Manual
Page 4
ENFORCER DR-1 Series H.264 Network DVR Quick Setup Guide
4
SECO-LARM U.S.A., Inc.
Rear Panel:
DR-104Q and DR-104-500Q:
DR-108Q and DR-108-500Q:
DR-116Q and DR-116-1.0TQ:
Rear panel feature descriptions:
1
LAN 10/100/1000M
Use a Cat5e/6 cable to connect the DVR to a Local Area Network for remote access.
2
Alarm I/O, RS-485,
and Audio
Allows the DVR to connect to alarm I/O and other RS-485 devices.
See Pin Connection chart on pg. 11 for more details.
3
Main Monitor
Allows the DVR to output a video signal to a security monitor using a coaxial cable.
4
Call Monitor
Allows the DVR to output a video signal to a secondary monitor using a
coaxial cable.
5
Video Input
Provides a connection point for video streams from cameras using coaxial cables.
6
Ground Screw
Connect to earth ground to prevent electrical damage to DVR.
7
Power Jack
Connect a 12VDC power source. (5 Amp)
8
Call Audio
Allows the DVR to output an audio signal to a secondary audio device.
9
Main Audio
Allows the DVR to output an audio signal to an audio device.
10
VGA Output
Allows the DVR to output to a computer monitor or other VGA device.
11
HDMI Output
Allows the DVR to output to a high definition television or other HDMI device.
12
USB Port
Provides connection point for USB flash drive, mouse, or other USB device.
1
2
3 4
5
7
8
9
10
6
11
12
1
8,9
10
3
6
7
4
11
5
2
12
1
2
3 4
5
7
8
9
10
6
11
12