Ta p e recor d ing – Sharp XL-35H User Manual

Page 25

Advertising
background image

02/9/11

XL35H_H_E3_2.fm

E-18

ENGLISH

XL-35H

8

7

6

5

4

3

2

1

T

a

p

e

Recor

d

ing

To interrupt recording:
Main unit operation:
Press the

button.

To resume recording, press the

button.

Remote control operation:
Press the button.
To resume recording, press the button.

To stop recording:
Press the button.
The tape will stop. When the button is pressed again, the CD will
stop.

!

Recording from the radio

To stop recording:
Press the button.

Notes:

"

If you hear a whistling noise whilst recording an AM station, move
the AM loop aerial.

"

Whilst recording from the radio, the recording pause function
does not work.

!

Erasing a recorded tape

1

Tune in to the desired station (see page 14).

2

Load a cassette into the cassette compartment with the
side to be recorded on facing you.

Wind past the leader of the tape, on which recording cannot be
performed.

3

Press the

button.

Recording will be paused.

4

Press the

( ) button.

1. Load the tape to be erased into the cassette compartment with

the side to be erased facing toward you.

2. Press the FUNCTION button until "TAPE" appears on the dis-

play.
When operating with the remote control, press the TAPE button.

3. Press the

button.

4. Press the

( ) button to start erasing.

Erase-prevention tabs of cassette tapes:

"

When recording on a cassette
tape, make sure that the erase-
prevention tabs are not re-
moved. Cassettes have remov-
able tabs that prevent
accidental recording or erasing.

"

To protect the recorded sound,
remove the tab after recording.
Cover the tab hole with the ad-
hesive tape to record on the
tape without the tab.

Side A

Tab for side B Tab for side A

Advertising