Sharp AL-840 - Manual (Page 7)

5
1
Getting Started
INSTALLING THE PRINTER DRIVER SOFTWARE
Windows 95/Windows NT 4.0:
1
Load paper into the paper tray of the printer. For loading of paper, see the section on
LOADING COPY PAPER in the copier operation manual.
2
Turn on the printer.
3
Turn on your computer and start Windows.
Before installing the printer driver, be sure to close all other applications which
may be open.
4
When using Windows 95 on a personal computer with plug & play*, the “Update
Device Driver Wizard” window will appear. Insert the installation CD-ROM into the
CD-ROM drive. Click the Next button and follow the on-screen instructions. Proceed
to step 7. If the “Copying Files” window appears during this operation, enter R:\ (if the
CD-ROM is designated as drive R) and click the OK button.
● If you use Windows 95 and the “New Hardware Found” window will appear, click
the Driver from Disk Provided by Hardware Manufacturer button and then click
OK. Proceed to step 6.
● If you use Windows 95 and the screen shown above or the “New Hardware Found”
window does not appear, proceed to step 5.
● If you use Windows NT 4.0, proceed to step 5.
★ Plug & play
This feature is effective if both the computer and peripheral equipment are equipped
with IEEE 1284 compliant parallel interface.
The screen displayed depends on the version of Windows.