Samsung 14F2 - Manual (Page 18)

18
ENG
Adjusting the Picture Settings
Your television has several settings which allow you to control picture
quality:
◆ Color Tone, Contrast, Brightness, Sharpness,
Color, Tint (NTSC only)
1 Press the MENU button.
Result: The “Picture” menu is displayed.
2 Press the + or – button.
3 Press the ▲ or ▼ button to select the “Adjust”, and then press the +
or – button.
Result: When select the “Mode” to “Custom”, the “Adjust” menu is
displayed.
4 To adjust the... Press the...
◆ Color Tone ◆ + or – button.
Result: You select the required option
(Normal, Warm1, Warm2,
Cool1, Cool2).
◆ Contrast ◆ + or – button.
◆ Brightness Result: The horizontal bar is displayed.
◆ Sharpness
◆ Color
◆ Tint (NTSC only)
5 When you are satisfied with the settings, press the TV button or,
press the MENU button repeatedly to return to normal viewing.
➣
The television has an “automatic degaussing” system that is
activated if magnetic interference is present. To degauss the
television screen, switch power off by pressing the “
”
(ON/OFF) button on the front panel (refer to “Automatic
Degaussing to Remove Color Patches” on page 31).
➣
If you make any changes to the “Adjust” settings, the picture
standard is automatically switched to “Custom”.
Select Enter Exit
Mode Custom
Adjust
Size : Normal
Picture
Select Adjust Exit
Adjust
Color Tone : Normal
Contrast 90
Brightness 50
Sharpness 50
Color 50
Picture
Contrast 91
Color Tone : Normal
Contrast 100
Brightness 50
Sharpness 50
Color 50
Select Adjust Exit
Adjust
Color Tone : Normal
Contrast 90
Brightness 50
Sharpness 50
Color 50
Picture
Color Tone : Normal
Contrast 100
Brightness 50
Sharpness 50
Color 50
Contrast 100
KS1_01818B_01_ENG_UMG 12/10/02 12:27 PM Page 18