Siemens 11 - Manual (Page 39)

38
Appendix
Gigaset USB Adapter 11 / en / A31008-E105-B102-1-7619 / appendix.fm / 06.12.2002
Cannot connect to
another wireless net-
work adapter
If you cannot make a connection to another wireless network
adapter from your computer, it could be due to one of the fol-
lowing reasons:
◆ Incorrect network type, channel, SSID or transmission rate.
Make sure these parameters are the same for all computers
that have a wireless network adapter.
◆ Make sure that the WEP setting is the same for all
computers that have a wireless network adapter.
◆ Changes are not being recognized by your computer.
Restart your computer.
◆ If in ad hoc mode, make sure the Log on to Windows NT
domain check box is not selected in the Client for
Microsoft Networks Properties dialog box in the Network
Configuration tab.
◆ Incorrect IP Address or Subnet Mask. Check these settings
in the TCP/IP Properties dialog box in the Network
Configuration tab.
Cannot connect to
Access Point
If you cannot make a connection to the Access Point, it could
be due to one of the following reasons:
◆ Make sure the Gigaset USB Adapter 11 and Access Point
have no physical connection problems.
◆ Make sure the SSID for the Gigaset USB Adapter 11 is the
same as that for the Access Point.
◆ Make sure the privacy type is the same as that of the Access
Point. Also, make sure the Default Key is the same for both
computers.
◆ Make sure that your access to the Access Point is not
blocked by security mechanisms, i. e. MAC filter, IP address
filter, WEP.
Symptom Action