Smart Technologies 4000i - Manual (Page 39)

99-00582-20 REV A0 Appendix B: Connecting Rack-Mount Equipment to the Projector Platform 33
Appendix B: Connecting Rack-Mount Equipment to the
Projector Platform
Use the clip-on nuts (included) to secure rack-mount equipment to the sides of the projector
platform, just below the projector itself. The projector platform can accommodate rack-mount
equipment with a width of 19" (48.3 cm).
1. Attach the clip-on nuts from the accessory kit to the sides of the projector platform.
2. Connect the rack-mount equipment to the clip-on nuts using 10-32 × 1/2" fasteners (not
included).
To connect rack-mount equipment to the projector platform
19" Rack-mount
Equipment
Clip-on Nuts