Modifying videoplus+ programming, Using the videoplus+ feature – Samsung SV-262B User Manual
Page 14
GB
27
Modifying VIDEOPLUS+ Programming
★
(V-665B/SV-265B Only)
If you wish to correct the programme displayed or modify certain elements, such as the recording
speed, you can do so before you press MENU a second time to confirm.
If you wish to...
Then...
Select an input source other
◆
Press the
➛
or
❿
buttons, until the
PR
selection flashes.
than the tuner (AV1, AV2 or
◆
Press the INPUT button one or more times to change the
AUX
★
(SV-665B only))
input source selection.
Result:
The programme number is replaced by:
•
The AV1, AV2 or AUX
★
(SV-665B only)
source using the INPUT button for a satellite tuner
or external video source
➢
The input source must be selected before changing any
other value.
Record a programme every day
◆
Press the
➛
or
❿
buttons, until the
DAY
selection flashes.
(Monday to Sunday) at the same time
◆
Press the
➐
or
❷
buttons, until the
DLY
(Daily) value is
displayed.
Record a programme every week
◆
Press the
➛
or
❿
buttons, until the
DAY
selection flashes.
on the same day and at the same time
◆
Press the
➐
or
❷
buttons, until the
W-
(Week) value is
displayed, followed by the required day.
Example:
W-SA
(Weekly Saturday)
Extend the recording time
◆
Press the
➛
or
❿
buttons, until the
STOP
selection flashes.
◆
Press the
➐
or
❷
buttons to increase or decrease the stop
time.
Select the recording speed
◆
Press the
➛
or
❿
buttons, until the recording speed selection
flashes.
◆
Press the
➐
or
❷
buttons until the correct indication is
displayed:
•
AUTO
(Auto Tape Speed Select) : see page 28
•
SP
(Standard Play)
•
LP
(Long Play)
Select the PDC recording
◆
Press the
➛
or
❿
buttons, until the V/P selection flashes.
◆
Press the
➐
or
❷
buttons until the “ON” indication is displayed.
☛
Do not select PDC unless you are sure the programme you
wish to record is broadcast with PDC. If you do set PDC ON
(by selecting “ON” in the right - hand column on the screen),
then you must set up the start-time EXACTLY according to
the published TV schedule. Otherwise the timer recording
won’t take place.
GB
26
Using the VIDEOPLUS+ Feature
★
(SV-665B/SV-265B Only)
Before presetting your VCR:
◆ Switch on both the television and your VCR
◆ Check that the date and time are correct
◆ Insert the cassette on which the programme is to be
recorded (safety tab intact)
Up to six programmes can be preset.
1
Press the TIMER button.
Result:
The
TIMER METHOD
is displayed.
2
Press the corresponding
➐
or
❷
buttons, until the
VIDEOPLUS
option is selected.
3
Press the
❿☎
button to select
VIDEOPLUS
.
Result:
A message is displayed to allow you to enter the
VIDEOPLUS+ code.
☛
If all six programmes have been set, the message
TIMER
IS FULL
is displayed. Refer to page 29 if you wish to
cancel a preset recording.
4
Press the numeric buttons to enter the code opposite the
programme that you wish to record in your television magazine.
➢
If you wish to correct the VIDEOPLUS+ code that you are
entering:
◆
Press the
➛
button until the digit to be corrected is
cleared
◆
Enter the correct digit
5
Press the MENU button.
Result:
The information concerning the programme is displayed.
☛
When using the VIDEOPLUS+ function for the first time with
stored stations, the programme number flashes. This one
time, you must enter the station number manually by
pressing the
➐
or
❷
buttons. Refer to the following page if:
◆
The programme number or times flash
◆
You wish to modify the programme
6
If the programme and times are correct, press the MENU button.
7
Press the VCR STANDBY/ON (STANDBY/ON) button to activate
the timer.
8
Refer to page 29 if you wish to:
◆
Check that your VCR has been programmed correctly
◆
Cancel a preset recording
☛
The numbers next to each TV programme listing are
VIDEOPLUS+ code numbers, which allow you to
programme your videorecorder instantly with the remote
control. Tap in the VIDEOPLUS+ code for the programme
you wish to record.
™ VIDEOPLUS+ is a trademark of Gemstar Development Corporation. The VIDEOPLUS+
system is manufactured under licence from Gemstar Development Corporation.
SPEED DUB TV/VCR TIMER
1
VIDEOPLUS
CODE ---------
CODE:
0-9
CORRECT:
➛
END:
MENU
** TIMER METHOD **
STANDARD
VIDEOPLUS
➐❷
❿
END:
MENU
STANDBY/ON
S
SH
PROG
1/JAN WED 21:28
PR DAY START
→
STOP
V/P
1 WE 1 12:00
→
12:50SP ON
-- ---- --:--
→
--:----
-
-- ---- --:--
→
--:----
-
-- ---- --:--
→
--:----
-
-- ---- --:--
→
--:----
-
-- ---- --:--
→
--:----
-
➐❷
➛❿
DELETE:
CLR/RST
MENU
7
VCR STANDBY/ON
S
SH
7
★
(SV-665B)
★
(SV-265B)