Sanyo AVL472 - Manual (Page 16)

Connecting a Camcorder
Connections
(Continued)
Connect the Audio/Video cables between the Audio (L/R)/Video jacks on the unit and camcorder.
How to connect:
To playback Camcorder
The operations of the camcorder may be different and is dependant on your model. Please read the user manual of your camcorder to confirm operation.
1. Turn on your TV, then press INPUT button. The INPUT SOURCE menu opens.
2. Press 5or6to select AV2, then press ENTER to confirm.
(Or you can press VIDEO button twice to go to AV2 mode directly.) If no AV2 on your model, buy a low-cost
easily available AV switching box.
3. Turn on your camcorder and set it to output mode. (For details, refer to your camcorder user manual.)
4. Insert the tape into the camcorder and press Play button.
Note
Connecting an HDMI device
Cables are often color-coded
to connectors. Connect red to
red, white to white, etc.
Connect the HDMI cable between the HDMI interface on the unit and HDMI output on the device.
To play from the device using HDMI:
How to connect a device using HDMI Connection:
1. Turn on your TV, then press INPUT button. The INPUT SOURCE menu opens.
2. Press 5or6to select HDMI
1(or HDMI 2 if HDMI 2 interface is used), then press ENTER to confirm.
(Or you just press HDMI button on the remote control to go to HDMI 1 mode directly. Press the HDMI button
once again to go to HDMI 2 mode.)
3. Turn on your device and set it to the correct mode. See the device’s user guide for more information.
! If the external device has DVI output only, use a DVI to HDMI adapter cable to connect to the HDMI terminal. Connect the audio
cable to the VGA AUDIO IN jack on the TV rear.
Note
14
or
AV cable
Camcorder
“PlayStation”
TV REAR
HDMI cable
Device with HDMI output
TV REAR
(For model
AVP4232/AVP504)