页面 10, Preparations, Antenna connection – Sanyo AVL472 User Manual

Page 10: Power connection

Advertising
background image

=

This illustration is for reference only. The AC plug may be different on different models.

=

This product should be operated only from the type of power source indicated on the marking label.

=

Always unplug the AC cord from power outlet when not using for a long period of time.

INSTALL the unit in a room where direct light will not fall upon the screen. Total darkness or a reflection on the picture
screen may cause eyestrain. Soft and indirect lighting is recommended for comfortable viewing.

Optimum reception of colour requires a good signal and will generally mean that a connection for cable system,
satellite service or an outdoor antenna must be used. The exact type and position of the antenna will depend upon
your particular area.

=

It is recommended that the 75-ohm coaxial cable be used to eliminate interference and noise which may occur due to radio wave
conditions.

=

75-ohm cable should not be bundled with the power cord and the like.

=

If an antenna is not installed properly, contact your dealer for assistance.

Antenna Connection

Preparations

(Continued)

Power Connection

Note

Note

8

Wall Antenna Socket

RF Coaxial Cable(75 ohm)

1. Connecting the female plug to the AC socket on the unit.
2. Connecting the male plug to the wall outlet as illustrated.

AC cord

Household

power outlet

TV REAR

Advertising
This manual is related to the following products: