Sanyo AVL472 - Manual (Page 25)

Press the VOL + or VOL- to increase or decrease the volume.
Press the MUTE button to temporarily turn off all sound. To restore the sound, press the MUTE button again.
Adjusting the Sound
Sound Adjustment
1
3
Press MENU and the main menu screen displays.
Within the menu, press 5 or 6to navigate through the options,
press3or4to adjust an option.
Press 3or4to select Audio menu, press 6 to access the menu.
2
Option Description
Sound Mode
Selects a desired sound mode. You can select from Standard, Music, Movie and Personal.
Standard: Select for normal programs.
Note: To quickly change the sound mode, press the AUDIO button repeatedly.
Movie: Select for a movie program.
Adjusting the Volume
Using the volume buttons (VOL+ and VOL – )
Using the Mute
Personal: The sound quality you set.
Bass
Treble
Balance
Adjusts Treble (high sounds) to personal taste. We recommend 2/3 to right for a fuller sound.
Adjusts Bass (low sounds) to personal taste. We recommend 2/3 to right for a fuller sound.
Adjusts volume balance (left and right volumes).
AVC
(auto volume control) Select On to equalize overall volume levels across all channels.
Select Off to turn off the auto volume control.
23
Music: Select for a music program.
Surround
Select On to turn on the surround sound effect. Select for personal taste.
Select Off to turn off surround sound.
SPDIF Type Use this item to select audio output mode from SPDIF. Select RAW to output audio signal as
its original format. Select PCM to output audio signal by PCM form (if available).
Audio Language
Selects an alternate language if the program has more than one language.
Press MTS/SAP button to select a stereo mode. You can select from [MONO], [STEREO] and [SAP].
(Only for digital programs)
Sound Mode
Bass
Treble
Balance
Surround
AVC
SPDIF Type
Audio Language
Picture Audio Time Setup Lock Channel
Standard
50
50
50
PCM
Select Move MENU Exit
English
On
On
Press MENU to return to previous menu. Press EXIT to exit the menu
screen directly.
4
(Only for digital programs)
Stereo/SAP Broadcasts Setup
(Only for analog reception)
- This TV can receive MTS stereo programs and any SAP (Secondary Audio Program) that accompanies the stereo program;
if the station transmits an additional sound signal as well as the original one.
- Stereo or SAP can be selected only when the TV station transmits these signals.
- Mono sound is automatically received if the broadcast is only in Mono.
- Select Mono if you are having difficulty receiving a stereo signal.
MONO: Select for mono reception. Use to reduce noise during weak stereo broadcasts.
STEREO: Select for stereo reception when viewing a program broadcast in stereo.
SAP: Select to automatically switch the TV to second audio programs when this signal is received.
! In DTV mode, you can press MTS/SAP button to select audio track (if available).
Note