Swann DVR4-Net-PLUS User Manual
Page 4
7.Search Play
TIME SEARCH:
EVENT SEARCH:
START STOP SEARCH:
UP
DOWN
ENTER
SEARCH
8. Time Search
Time Search
ENTER
Time Search
LEFT
RIGHT
ENTER
SEARCH
Search Play
START:
END:
Push the Search button to display the Search Play window on the screen.
search recording by the time you enter.
search recording by event list.
search recording by start and stop segments.
Push the
or
button to move the cursor, then push the
button to enter the sub
menu you have highlighted. Push the
button again to quit the search menu.
Move the cursor to
, then push the
button and the
window will
appear, as illustrated as below.
Push the
or
button to move the cursor, push
and button to modify the time, then
push the
button to start play from the time you selected. Push the
button again to
return to the
menu.
If the time you enter doesn’t match recorded video, the DVR will automatically play the video
closest to the time you enter.
the first time you record.
the end time of the last recording, you must enter a time between start and end. If the HDD
has been overwritten, the start time may not be correct.
+
-
9. Password Reset
10. Changing the On Screen Display (OSD) language
Press the “pause” button 12 times on the front panel and it will reset the DVR's password to
the factory default password of (0000).
You can change the OSD language from the default English to French or Spanish by following
the steps below.
To change the OSD language, enter the menu system by pressing the MENU button on the
front of the DVR and correctly input your password.
Highlight the “SYSTEM SET” option, and press the ENTER button.
Select “MENU LANGUAGE” and press the ENTER button.
Push the ADD or DEC buttons to change the language and press the ENTER button to select
your language.
Now fully exit the menu system and restart your DVR.
If
is disabled the system will not start recording on alarm. Setting schedule on
or off is achieved through pushing the
button on the front panel or remote, but not
through the System Setup menu and window. When the unit is in
active, the
character “ ” will display on the screen. Alarm video recording can’t be stopped by pushing the
or
button while
is active. To ensure that once
is
set to on that the schedule cannot be accidentally stopped there is a password protection to stop
. You must press the
button then enter the correct password to turn
off.
Check
setup before recording; confirm the video quality and the frame rate, as
the record setting can’t be changed during the recording process.
As long as the alarm input signal is correctly set the alarm recording will continue during the period
of time set up by
, and when the outside the time period the alarm recording
automatically stops.
Time recording starts and stops recording automatically according to the pre-arranged time period.
It is applied to a fixed timetable, for example business hours time recording (or outside business
hours time recording) with fixed start/stop time.
To start the
function you must have a record schedule setup beforehand. When
this is done, push the
button on the front panel to set schedule mode to on and the
schedule symbol “ ” will display on the screen. The
mode will not work unless
you activate
.
To make
mode active the system must be set to
active and that
period is set to “ ” in
setup.
In Time Record mode, you must push the
button then enter the password to stop
time recording.
Because Time recording is reliant on the system being set with the correct time, you must adjust the
time to your correct local time before using this function.
Push the
button and the system will begin to play the images recorded from the start of the
most current recording.
If the recording is playing, push the
button to pause playing, push the
button again to
resume normal play.
To use
playing or
playing, push the
or
button while
the recording is playing to see faster playback. Push the
button to return to normal speed
playing from the current place.
Continuous pushing of the
button will change the fast-forward between five levels of
speed (
,
,
,
,
) in sequence. Continuously pushing the
button will change the
fast backward playback between four levels of speed (
,
,
,
) in sequence.
During playback mode, press the
button to play a frame at a time, and hold
the button in to continually play one frame at time while the button is held.
During playback mode, press the
button to play back a frame at a time, and
hold the button in to continually play one frame at time while the button is held.
Push the
button again to resume normal playback speed, or push the
button to stop
playing.
Schedule mode
SCHEDULE
Schedule Mode
S
RECORD
STOP
Schedule Mode
Schedule Mode
Schedule Mode
SCHEDULE
Schedule Mode
Alarm Recording
A/M REC TIME
5.Time Recording
Time Recording
SCHEDULE
S
Time Recording
Schedule Mode
Time Recording
Schedule Mode
T
Record Schedule
SCHEDULE
6.Playback
PLAY
PAUSE
PLAY
Fast Forward
Fast Backward
FORWARD
REW
PLAY
FORWARD
X2 X4 X8 X16 X32
REW
X2 X4 X8 X16
Single Frame Forward
Single Frame Rewind
PLAY
STOP
4
5
Basic Operation (continued)
Basic Operation (continued)