Sanyo DS35224 - Manual (Page 8)

VIDEO AUDIO INPUT
COMPONENT AV2 AV1
S-VIDEO
VIDEO
(MONO)
AUDIO R
L
R R
L L
Y
P b
P r
AUDIO
OUTPUT
❶
Back of TV
Stereo Amplifier
CONNECTING AUDIO OUT JACKS TO A STEREO AMPLIFIER
Switch off TV and external equipment before connecting cables. (Cables are not supplied.)
❶
Connect the TV Audio Out (R/L) to the Stereo Amplifier In (R/L).
❷
Press POWER to turn on the TV. Turn on external equipment also.
❸
Use the AUDIO OUT on-screen menu options to select Fixed or Variable output signal.
Notes: When TV Speakers is in the ON mode,
sound will be produced through your
TV and external speakers.
When TV Speakers is in the OFF
mode, sound will be produced only
through external
speakers.
What you will need for connections:
❶
Audio Cable – 1
Using the Audio Output Jacks
QuickTips
■ Position your TV at
least 2 feet from
stereo speakers. The
magnets in the
speakers may affect
the picture quality.
■
Be sure batteries
are installed
correctly.
■
Point the remote
control toward the
equipment you want
to operate. Objects
between the remote
control and the
equipment may
cause misoperation
of the remote
control function.
Need help?
Visit our Web site at
www.sanyoctv.com
or Call 1-800-877-5032
8 Connect Stereo Amplifier to Audio Out / Remote Control
Operates your TV, VCR, Cable converter box, DVD Player, and Satellite Receiver. To program
the remote control, see pages 10 ~ 12.
INSTALL BAT TERIES AS SHOWN (2 AA, not included)
Notes:
Do not mix old batteries with new ones or mix different types of batteries together.
Remove the batteries if the remote control will not be used for a month or more. Weak
batteries may leak and cause damage. (Normal battery life is roughly six months.)
IMPORTANT NOTE: Spent or discharged batteries must be recycled or disposed of properly in compliance with
all applicable laws. For detailed information, contact your local County Solid Waste Authority.
Using the Multimedia Remote Control
➀
Mode Keys—Use these keys to program the remote control and to select the operating
mode (VCR, TV, CABLE, DVD, SAT, or AUX). To Operate Your... VCR—Press the
VCR key; Television—Press the TV key; Cable Box—Press the CABLE key; DVD
Player—Press the DVD key; and Satellite Receiver—Press the SAT key.
Note: Make sure you hold down the mode key while entering a code number, see
page 10.
➁
Input Key—In the TV and Satellite modes, this key selects the program source to display
on the screen (TV signal or signal from equipment connected to the AV jacks). In the VCR
mode, this key functions as a VCR’s TV/ VCR key.
REMOTE CONTROL KEYS