Samsung VP-X110L - Manual (Page 124)

ENGLISH
124 124
Maintenance : Cleaning and Maintaining the CAM
After using the CAM
✤ For the safekeeping of the CAM, follow these steps.
✓ Turn the CAM off.
✓ Remove the Battery Pack (refer to page 20).
✓ Remove the Memory Stick (refer to page 34).
✤ To prevent any damage to the LCD monitor, do not apply excessive force on its moving parts.
✤ Do not drop or in anyway shock the CAM.
✤ For prolonged use of the CAM, avoid using it in places subject to excessive humidity or dust.
✤ Do not leave the CAM in places subject to:
✓ Excessive humidity, steam, soot or dust.
✓ Excessive shock or vibration.
✓ Extremely high (over 50°C or 122°F) or extremely low (under 0°C or 32°F) temperatures.
✓ Strong electromagnetic fields.
✓ Direct sunlight or in a closed car on a hot day.
✤ For the safe use of the battery pack, follow these.
✓ To conserve battery power, be sure to turn off the CAM power when not in use.
✓ Battery consumption may vary depending on the condition of use. Recording with many starts and stops,
frequent zooming, and recording in low temperatures will shorten actual recording times.
✓ Dispose of used battery packs promptly. Do not dispose of them in fire.
✓ The battery pack will become warm during charging and use. This is not a malfunction.
✓ The battery pack has a limited service life. If the period of use becomes noticeably shorter with a normal charge,
the battery pack is at the end of its service life. Replace it with a new battery pack.
✤ For the safe use of the Memory Stick and the Memory Stick Pro, follow these.
✓ The Memory Stick should be stored away from heaters and other heat sources. Avoid storing Memory Sticks under direct
sunlight and avoid electromagnetic fields.
✓ Do not power off any devices while transferring data, as this may destroy the data.
✓ Back up your image data often to a hard disk or other permanent storage media.
✓ Format the Memory Stick periodically.
✓ When formatting the Memory Stick or Memory Stick Pro, format in the CAM. If you format it on PC, use the
‘Memory Stick Formatter’ in the supplied software CD.