Samsung THE COMPLETE NETWORK SOLUTION EMM-E6 - Manual (Page 17)

Get started
17
To transfer files from a PC
Connect the frame to a PC with the supplied USB cable
1
(p. 16).
When the frame is turned off, connect it to the PC first, and then turn
it on.
Select
2
Mass Storage .
When connected, ‘ • Mass Storage’ will appear on the screen and
a pop-up window will appear on the PC.
If you connect the frame to a PC while using it as a mini-monitor
(p. 42), you need to switch to Mass Storage mode by using the
Frame Manager program. For more information, refer to the user
manual of the Frame Manager.
Open a folder to view files.
3
The removable disk drive will appear as ‘ • 800P’ or ‘1000P’ on the
PC. Open the drive for the corresponding model in My Computer
and copy your photos.
Copy files from the PC to the frame or vice versa.
4
Some files are embedded on the frame by default. •
When there is not enough memory, delete these
stock files.
If your photos are large, they will consume more
•
memory and the preview will play slowly. Change
the photo resolution to 800 X 480 (for ‘800P’)
or 1024 X 600 (for ‘1000P’). Or set the frame to
copy and automatically resize your photos (Frame
Memory Copy p. 39).
Transfer files from a PC
Connected to PC USB port.
Do not insert or remove storage devices to/
from the Photo Frame while they are
connected to the PC.
You can switch to Mini Monitor mode by
using Frame Manager.
Mass Storage