SanDisk View - Manual (Page 11)

Sansa® View Overview 9
4 Battery Displays battery level
5 Charging Indicates player is being charged
6 Play/Pause Displays music or recording file playback status
7 Progress Bar Displays progress of the current track
8 Track Number Displays current track number and total number of tracks
9 Track Name Displays name of the song
10 Album Name Displays name of the album
11 Shuffle Indicates that the shuffle function is enabled
Battery
The Sansa View player comes with an internal rechargeable battery. To use the player for
the very first time, remember to fully charge the battery.
Battery Level Indicator
The battery level indicator is located at the bottom-right corner of the screen.
Battery Full Battery Low
Charging
To charge the battery, please follow these steps:
1. Connect the smaller end of the Sansa cable into an available USB port on the
computer.
2. Connect the larger end of the Sansa cable into the Sansa player.
3. The computer must be on for most USB ports to charge your battery. Your
Sansa will show connected and the yellow charging indicator will appear. The
battery level indicator will blink while charging. You will not be able to play
your device while connected to the computer.
4. To stop recharging, simply disconnect the cable.
The battery can also be charged using an AC adapter (not included) or a car adapter
(not included) and you will be able to play your device while charging with one of the
adapters.
NOTE: Some Low-Power USB ports may not provide enough power to charge
the player.