Samsung Washing Maching WF361 - Manual (Page 29)

cleaning and maintaining your washer _29
PURE CYCLE TM
Pure Cycle is a self-cleaning cycle that removes any mold from inside the washing machine.
1. Press the Power button.
2. Press the Pure Cycle™ button.
Once you have pressed the Pure Cycle
button, the only function you can set is the
Delay Start function.
For WF365* models
Select the Pure Cycle™ cycle by turning
the Cycle Selector.
3. Press the Start/Pause button. The Pure
Cycle cycle will start.
The Pure Cycle Auto Alarm Function
• If the “Pure Cycle” button is lit after a wash, it
indicates that tub (drum) cleaning is required.
In this case, remove the laundry from the
washing machine, turn the power on, and
clean the drum by running Pure Cycle.
• If you do not run Pure Cycle, the “Pure
Cycle” indicator turns off. However, the
“Pure Cycle” indicator will light again after
two washes. Not running Pure Cycle at
this point will not cause a problem with the
washing machine.
• Although generally, the Pure Cycle Auto Alarm
appears once a month or so, the frequency
may differ depending on the number of times
the washing machine is used
03 CLEANING AND MAINT
AINING
WF361_363_365-02832J-03_EN_20120829.indd Sec7:29 WF361_363_365-02832J-03_EN_20120829.indd Sec7:29 2012-08-31 12:38:21 2012-08-31 12:38:21