Sharp AL-1456 - Manual (Page 71)

69
9
*
1
Feed paper lengthwise only.
*
2
Leading and trailing edges.
*
3
Along the other edges in totals.
*
4
The trailing edge of the second (Two-sided copy mode).
*
5
Not including TD and drum cartridges.
First-copy time may differ depending on operating conditions, such as power-supply voltage and room
temperature. The values for copy speed are rounded to the nearest whole number.
Resolution
Scanner — 600 x 1200dpi
Copier
600 x 300dpi (Auto/Manual mode)
600 x 600dpi (Photo mode)
Printer 600dpi
Gradation
Scan 256 levels
Output 2 levels
Bit depth 1 bit or 8 bit/pixel
Sensor Colour CCD
Scanning speed Max. 2.88 ms/line
Memory 8 MB 16 MB
Power supply
Local voltage
±
10% (For this copier power supply, see the
name plate located on the back of the unit)
Power consumption 1000 W
Overall
dimensions
Width (mm) 607.6 607.6 607.6 809
Depth (mm) 462.5 492.5 492.5 492.5
Weight (Approximately) *
5
16 kg 19 kg 19 kg 23 kg
Unit dimensions
Width (mm) 518 518 518 518
Depth (mm) 462.5 492.5 492.5 492.5
Height (mm) 295.6 380.4 380.4 465.4
Operating conditions
Temperature: 10°C to 30°C
Humidity: 20% to 85%
Emulation SHARP GDI
Interface
IEEE1284-compliant bi-directional parallel interface/USB
interface (USB1.1 Standard)
Noise level
Sound Power Level L wA (1B=10dB)
Copying: 6.0 [B], Standby: 3.7 [B]
Sound Pressure Level L
pA
(bystander positions)
Copying: 46 [dB (A)], Standby: 23 [dB (A)]
Noise emission measurement in accordance with ISO 7779.
Emission concentration
(measurement according to
RAL-UZ 62) Ozone: less than 0.02 m
g
/m
3
Dust: less than 0.075 m g /m
3
Styrene: less than 0.07 m
g
/m
3
As a part of our policy of continuous improvement, SHARP reserves the
right to make design and specification changes for product improvement
without prior notice. The performance specification figures indicated are
nominal values of production units. There may be some deviation from
these values in individual units.
Model AL-1045 AL-1255 AL-1456 AL-1555