Operation, Specifications – Sirius Satellite Radio SIRIUS CONNECT 3SIR-ALP10T User Manual

Page 5

Advertising
background image

9

SIR-ALP10T Operation and Installation Guide

8

SC-H1 SIRIUS Connect Tuner Installation Guide

9

SC-H1 SIRIUS Connect Tuner Installation Guide

Operation

Consult the owners manual of your SIRIUS-
ready receiver for operating instructions.

The SC-H1 Tuner has an indicator light
which provides basic status information
about the tuner. When the tuner is first
powered on, this light will be red to indicate
the tuner is receiving power. After the initial
power-on indication, the light will provide the
following status information:

Steady Red: Initial power-on indication.

Flashing Red: Indicates that the antenna is

not connected to the Tuner.

Steady Amber: Indicates that the antenna is

connected to the Tuner, but no signal is
being received.

Steady Green: Indicates that the Tuner is

functioning properly and receiving a
good signal.

Specifications

Operational Frequencies

Satellite .......................................................................... 2322.293/2330.207 MHz
Terrestrial ....................................................................................... 2326.250MHz

Power Requirements .............................................................................. 5 Volts DC

Dimensions ....................................................................... 1” x 2.6” x 3.6” (WxHxD)

26mm x 66mm x 92mm (WxHxD)

Antenna Type ......................................................................................... Windowsill
Antenna Cable Length ........................................................ 21’ (single micro-cable)
Connector Type .............................................................................................. SMB
Audio Interface ................................................... RCA-type Stereo L/R Connectors

Optical Link Connector

Audio Output .................................................................................. 0.75v, 550 Ohm
Signal to Noise Ratio .......................................................................................80dB
Weight ........................................................................................... 0.1 kg. (3.5 oz.)

Included Cable .............................................................................. 8-Pin DIN Cable

Note: Design and specifications are subject to change without notice.

Advertising