Sony READER DAILY EDITION PRS-950 - Manual (Page 128)

Changing Settings
128
Table of Contents Index
Icons in the access points list
Icon Description
Tap to display the setting screen of the
access point to configure or edit the
access point settings (  133 ).
The signal strength of the access point.
The access point is set to use an
encryption method.
Status of the access point in the access points list
Messages Status
[Configured] Configured access point
[Connected] Currently connected access point. While
connecting, [Connecting] appears. A
check mark and [Connected] appear when
the Reader connects to the access point.
[Invalid
Configuration]
The access point configuration is invalid.
Confirm the settings of the access point.
Also, in the Hotspot service, for which
browser authentication is required, the
browser has not been authenticated, or
browser authentication failed.
Notes
 For information on the settings of the access point, refer to
the operation guide of the access point, consult the
administrator of the access point, or consult the public
Internet access service provider.
 You can configure up to 20 access points.