Star Micronics Automatic Sheet Feeder SF-15HA - Manual (Page 7)

Installing the automatic sheet feeder 3
EnglishEnglish
❏
Lower the auto sheet feeder into the printer so the two round tabs on its
arms enter into grooves in the printer mechanism that was exposed when
you removed the two small pieces (see “Preparing the printer” in the
previous section). The top of the automatic sheet feeder angled towards the
front of the printer when you do this.
❏
Swing the back of the automatic sheet down, and press down gently until it
settles securely in place.
❏
Close the mute cover.
❏
Insert the three hopper attachments on top of the hopper support as shown
below.
Hopper attachment