Samson C.valve C Class - Manual (Page 5)

3
C valve Features
The Samson C valve microphone and instrument pre-amp utilizes the latest technology in circuit design. Here are
some of its main features:
• A high quality microphone or instrument pre-amplifier using discrete transistor and tube gain cells.
• On board Limiter for leveling the output is useful in recording and live sound applications.
• The total amount of harmonic overtones or “warmth” can be controlled using the Saturation control.
• An Input Gain control is included to maximize the overall input gain stage, handling levels from micro-
phones or instruments.
• A pre-set “sweetening” equalization curve can be added using the Enhance switch.
• Positive or negative phase can be selected using the Phase switch.
• The addition of an Analog VU meter makes it easy to read the Output Level.
• 48-volt phantom power for powering condenser microphones is available by pressing the LED, backlit,
48-Volt push switch located on the front panel.
• S/PDIF output via an internal, high quality A-to-D (analog-to-digital) converter sends 24-bit digital audio to
hard disk recorders via the rear panel RCA connector.
• Sample rate selection via the front panel, backlit switch allows 48 or 96K sample rates.
• Six segment LED Input VU meter displays the level after the Gain control.
• Convenient 1/4-inch insert points are included for external signal processing.
• Balanced XLR microphone input and 1/4-inch balanced line input connectors allow easy hook up of mics
or instruments.
• Oversized, rubber bumpers with tilting feet allow several Samson C class units to be stacked and tilted in
an ergonomically correct operating position.
• The stylish, bead blasted, electric blue anodized front-panel is as easy to read as it is to look at.
• Three-year extended warranty.