SBC comm SBC-125 - Manual (Page 12)

0
Functions
lamp Is on, you can press the MESSAGE button to connect to your “Voice
Messaging” service. When pressed, the phone will automatically dial *98 (this is
the default), which is the code to access “Voice Messaging” in many areas.
• CLEAR MESSAGE Function
Use this button to manually turn off the Message Waiting Lamp and/or the
envelope (message waiting) icon on the LCD.
• CALL FORWARD ON/OFF Function
The phone features 2 memory keys set aside for the “Call Forwarding” feature
available from your phone company.
• To store CALL FORWARD ON dialing sequence:
1. With the phone on-hook Enter
*72
2. Press the PAUSE button twice.
3. Enter the number that you would like to forward to.
4. Press and hold the CALL FORWARD ON button until the LCD displays
“SAVE OK”.
• To activate call forwarding press CALL FORWARD-ON button.
• To deactivate call forwarding press CALL FORWARD-OFF button (The
phone will automatically dial the access code *73,Pause,Pause,End Call).
• CALL WAITING OFF Function
If you subscribe to the “Call Waiting” feature through your phone company
and don’t wish to be interrupted by a second caller during a telephone call do
the following:
1. Press the CALL WTG OFF button (The access code*70 is dialed
automatically)
2. After hearing a second dial tone, you can dial the number
NOTE: During that call, there will be no interruption from Call Waiting.
After you hand up, Call Waiting will be reactivated for you next call.
• Re-Programming Network Service Buttons
Access codes for network services are not the same for all telephone companies.
To store a different access number or to restore the access number to the
appropriate button, do the following:
1. In the on-hook state enter your access number.
2. Press and hold the appropriate button until the LCD shows “SAVE OK”.