Sharp AM-300 User Manual

English

Advertising
background image

AM-300/400

QUICK SETUP GUIDE

AM-400 only: Connect the phone line cord
to the TEL. LINE jack and a wall jack.

Italy: Use the provided adapter to connect the
line cord to the wall socket.

1

7

Attach the trays.

3

Load paper.

Make sure you have the following items. If any
are missing, contact your dealer or retailer.

Note: The shape of the line cord plug varies by
country. An adapter (not shown) is provided in
some countries.

1. Remove the output tray.

4

5

6

Install the toner cartridge and drum cartridge.

2. Remove the drum cartridge from its

packaging.

4. Remove the toner cartridge from its

packaging. Shake the cartridge side
to side four or five times to distribute
the toner evenly within the
cartridge.

3. Insert the drum cartridge,

sliding it along the guides.

5. Insert the toner cartridge, sliding it along

the guides

until it clicks into place.

7. Press

to select

“YES” and

then press

. (This resets

the toner cartridge counter.)

8. Reset the drum cartridge counter:

a.Press

once and then

or

until “LIFE” appears in the

display.

b. Press

and then

.

c. Press

repeatedly to exit.

MENU

Z

A

6. Close the front cover

and

then the side cover

.

PRINTED IN THAILAND (TCADH3785XHZZ)

Display:

1:YES, 2:NO

TONER EXCHANGED?

2. Insert a stack of paper

into the tray, print side up.

1. Press

. Open the side cover

and then the front cover

.

Important:
Pull the scanner release toward you to
release the scanner lock.
Caution:
Be sure to release the scanner lock
before plugging in the power cord.

Plug the power cord into a standard, earthed
power outlet.
Note: The power outlet must be installed
near the equipment and must be easily
accessible.

2

1

2

3

Caution!
Do not touch the fusing unit
under the side cover after the
machine has been in operation,
as it may become very hot.

Grasp this handle to
push the cartridge in

Press on the arrow
mark to make sure
the cartridge clicks
into place

2

1

Toner
cartridge

Telephone line
cord

(AM-400

only)

Drum
cartridge

CD-ROM

Setup
Guide

Document
feeder tray

Output tray

When the tray
stops, lift the
end slightly
and push in.

3. Squeeze the sides of the paper

guide and slide it to the slot for
the length of paper loaded.

4. Replace the output tray.

TEL.

LINE

TEL.

SET

For detailed instructions
on setting up and using the AM-300/400, see the
online guide on the CD-ROM.
To open the guide, double-click the Manual folder on
the CD-ROM, double-click English, and then double-
click Online Manual.pdf.
(Note: Acrobat Reader 5.05 or higher is required to
view the manual.To install Version 5.05, double-click
Acrobat Reader, English, and then ar505enu.exe
on the CD-ROM.)

All company names and product names appearing in this
setup guide are the trademarks of their respective owners.

English

AM-400 only: Set the date and time
that appear in the fax mode display.

1. In the date and time display of fax mode

(press

if needed to select fax

mode),

press , , .

2. Enter a two-digit number for the day

("01" to "31").

Example: the 5th

To clear a mistake press

.

3. Enter a 2-digit number for the month.

Example: February

4. Enter the year (four digits)

Example:

FAX

MENU

Z

8

5. Enter a two-digit number for the hour

(00 to 23) and a two-digit number for
the minute (00 to 59).

Example: 9:25

6. Press .

7. Press

repeatedly to exit.

ENTER

The stack should
not be higher
than this line

Note: The
shape of the
power plug
varies by
country

Note: The
shape of the
line cord plug
varies by
country.

Advertising
This manual is related to the following products: