Sharp PG-M10X - Manual (Page 18)

16
ConnectionsConnections
Connecting Video Equipment With Component Video Signal (YP B P R ) Output
Video equipment with component video signal (YP B P R ) output can be connected to this unit by setting the COMPUTER input
terminal to YP B P R (see page 31) from the menu.
Note that this unit is compatible only with 480I component video.
Connection to the COMPUTER input terminal
Connections
AUDIO MOUSE COMPUTER VIDEO S-VIDEO
Rear panel terminals
of this unit
Audio cable (accessory)
Audio adaptor (accessory)
To audio output terminals
To component video (YP
B
P
R
) OUT terminal
Component cable* (YP B P R cable: option)
* Model name: AN-C3CP/AN-CMPA01
Jacks: RCA
× 3 mini D-Sub 15-pin
For Americas customers, please purchase
an AN-CMPA01 cable from your local dealer.
(L)
White Red Green Blue Red
(R) (Y) (P B ) (P R )
DVD player
Plug in the connection cable
and tighten the screws.
Connecting a PC or Macintosh
This unit can be used as a display for numerous applications by connecting the analog RGB output connector of a PC to the
COMPUTER input terminal of this unit and setting the COMPUTER input terminal to RGB (see page 31).
• Either read the instruction manual or contact the manufacturer concerning the method used to set your PC.
AUDIO MOUSE COMPUTER VIDEO S-VIDEO
Rear panel terminals of this unit
To Headphone jack
Audio cable (accessory)
Mini D-Sub 15-pin connector
Computer RGB cable (accessory)
IBM PC/AT compatible Macintosh mini D-Sub 15-pin monitor output connector.
Plug in the connection cable
and tighten the screws.