Thermostat calibration and bypass flame adjustment – Southbend S36D User Manual
Page 28
S
ERVICE
S
S
ERIES
R
ESTAURANT
R
ANGES
P
AGE
28
OF
40
O
WNER
’
S
M
ANUAL
1191904
REV
1
(11/10)
Figure 12
Thermostat Calibration and Bypass Flame Adjustment
Bypass Adjuster
Calibration Stem
Dial Insert
Bezel
Dial
C
ONVERSION FROM
O
NE
T
YPE OF
G
AS TO
A
NOTHER
Each range is shipped adjusted and equipped for a specific type of gas (either natural gas or propane). To convert a
range from one type of gas to another, do the following:
1. Refer to service procedures to access all burner orifices.
2. Refer to instructions included with conversion kit.
3. Follow all steps as indicated in the conversion kit.
4. Check for leaks and proper manifold pressure (the procedure is on page 25).
5. Re-light all pilots and check for proper operation.
Note: A kit for conversion to a different type of gas may be purchased from Southbend.