Woodstock SHOP FOX M1054 - Manual (Page 20)

-10-
M1048 10" x 18" Metal Cutting Bandsaw
SE
TU
P
The SHOP FOX ® Model M1048 has been carefully pack-
aged for safe transporting. If you notice the machine has
been damaged, please contact your authorized SHOP
FOX
® dealer immediately.
UNPLUG-power cord before you do
any assembly or adjustment tasks!
Otherwise, serious personal injury to
you or others may occur!
Unpacking
SETUP
The following is a description of the main components
shipped with the SHOP FOX ® Model M1048. Lay the com-
ponents out to inventory them.
Note: Some parts and hardware may already be installed
on the machine. Make sure to check the machine when
you use this inventory list.
Box Inventory (Figure 4) Qty
A. Model M1048 Metal Cutting Bandsaw ...................1
Hardware and Tools (Not Shown)
—Chip Tray .................................................1
—Triagle Screw 5 ⁄
16
-18 x 3 ⁄
4
" .............................1
—Flat Washer 5 ⁄
16
..........................................1
—Hex Nut 5 ⁄
16
-18 ...........................................1
—Hex Bolts M12-1.75 x 50 (Leveling) ...................4
—Hex Nuts M12-1.75 (Leveling) .........................4
—Handwheel ................................................1
—Knob .......................................................1
Inventory
Figure 4. Model M1048 inventory.
If any parts are missing, examine the pack-
aging for the missing parts. For any missing
parts, find the part number in the back
of this manual and contact Woodstock
International, Inc. at (360) 734-3482 or at
[email protected]
SUFFOCATION HAZARD!
Immediately discard all
plastic bags and pack-
ing materials to elimi-
nate choking/suffocation
hazards for children and
animals.