Siemens Gigaset SL565 - Manual (Page 37)

36
Operating the answering machine
Gigaset SL565 / GBR PTT / A31008-M1715-L111-2-7619 / answering_m.fm / 11.7.07
Diverting an external call to the
answering machine
You can divert an incoming external call to
the answering machine even if it is
switched off.
Requirement: sufficient storage space is
available on the answering machine.
An external call is signalled on the hand-
set:
Ÿ Press the display key.
The answering machine starts immedi-
ately in recording mode and records the
call. The set time for the call acceptance
(page 36) is ignored.
Activating/deactivating two-way
recording
You can record an external call with the
answering machine.
¤
Inform the caller that the call is being
recorded.
§Options§ Open menu.
Two Way Record
Select and press §OK§ .
The two-way recording is indicated on the
display by an advisory text and is added to
the answering machine list as a new mes-
sage.
§End§ Press the display key to stop
the two-way recording.
The max. recording time depends on the
available memory of the answering
machine. If the memory is full you will
hear an end tone, the recording is
aborted, and the call recorded up to that
point is listed in the answering machine
list as a new message.
Activating/deactivating listen in
During recording of a message you can lis-
ten in via the loudspeaker of registered
handsets.
Permanently activating/deactivating
listen in
w
¢
Ð
¢
Voice Mail
¢
Call Screening
¢
Handset
( = on)
a Press and hold (idle status).
You can switch off the Call Screening func-
tion on the handset during the recording.
Switching off listen in for the current
recording
a Press the end call key.
Setting up the answering
machine
The answering machine has already been
preset at the factory. Make individual set-
tings using the handset.
Call acceptance/charge saving
function for remote operation
You can set when you want the answering
machine to accept a call.
The options are:
0 sec. , after 10 sec. , 20 sec.
or 30 sec. and the cost-saving setting Auto-
matic .
On Automatic the following applies for call
acceptance:
u If no new messages are present, the
answering machine accepts a call after
20 seconds.
u If new messages are present, the
answering machine accepts a call after
10 Seconds.
‰