Sharp XL-DV60 - Manual (Page 24)

24
XL-DV60
D
V
D O
p
eration
Playing a disc (continued)
Caution:
Notes:
! When the unit is turned on, no operation is possible for 10 sec-
onds as the unit is performing the initial setting.
! Stop positions may be recorded on some discs. When you play
such a disc, playback stops there.
! During an operation, " " may appear indicating that the opera-
tion is disabled by the disc.
" To resume playback after stopping
(resume play)
You can resume playback from the point playback is stopped.
To cancel resume play:
Press the button again while "
Pre-Stop" is lit.
Notes:
! The resume play feature is disabled on some discs.
! Depending on the disc, playback may resume slightly before the
position where it was stopped.
! Do not place two discs in one disc tray.
! Do not play discs with special shapes (heart
or octagon shaped) as it may cause malfunc-
tions.
! Do not push the disc compartment while it is moving.
! If the power fails while the disc compartment is open, wait until the
power is restored.
! If the disc compartment is stopped with force, the unit will not func-
tion. If this occurs, press the ON/STAND-BY button to enter the
power stand-by mode and then turn the power on again.
! If a disc is damaged, dirty, or loaded upside down, the disc will
skip or not play.
! When attempting to play discs with scratches or of a different re-
gion number, or unplayable or restricted (*1) discs, an error mes-
sage will appear on the TV display and the disc will not play.
(*1) Viewing is prohibited on some DVDs according to the audi-
ence age.
1 While the disc is playing, press
the
button.
The system stores the point you stopped.
2 To restart play, press the
(play) button.
Playback resumes from the point you left off.
Pre-Stop
Play
Stop