Samsung HT-TP75 - Manual (Page 10)

GB
CONNECTIONS
Press AUX on the remote control to select ‘DIGITAL IN, AUX 1 or AUX 2’ input.
•
Each time the button is pressed, the selection changes as follows: USB ➝ DIGITAL IN ➝ AUX 1 ➝ AUX 2 .
• You can also use the FUNCTION button on the main unit.
The mode switches as follows:
DVD/CD ➝ DIGITAL IN ➝ AUX 1 ➝ AUX 2 ➝ USB ➝ FM ➝ AM .
Connect the Digital Input (OPTICAL) to the Digital Output on the external digital component.
1
Connect Audio In on the Home Theater to Audio Out on the external analog component.
•
Be sure to match connector colors.
2
3
Example: Digital signal components such as a Settop Box or CD Recorder.
Analog signal components such as a VCR or TV.
Connecting an External Digital, Analog Component
Connecting External Components
Optical Cable
(not supplied)
18 17
External Digital
Component
Audio Cable
(not supplied)
If the external analog component
has only one Audio Out, connect
either left or right.
External Analog
Component
Connecting the FM and AM Antennas
The cooling fan supplies cool air to the unit to prevent overheating.
Please observe the following cautions for your safety.
• Make sure the unit is well-ventilated. If the unit has poor ventilation, the temperature inside the unit could rise
and may damage it.
• Do not obstruct the cooling fan or ventilation holes. (If the cooling fan or ventilation holes are covered with a
newspaper or cloth, heat may build up inside the unit and fire may result.)
Cooling Fan
FM antenna connection AM antenna connection
1. Connect the FM antenna supplied to the
FM 75 Ω COAXIAL terminal.
2. Slowly move the antenna wire around until
you find a location where reception is good,
then fasten it to a wall or other rigid surface.
1. Connect the AM loop antenna supplied
to the AM and terminals.
•
Insert the black wire into the black terminal and the
white wire into the white terminal.
2. If reception is poor, connect an outdoor
single vinyl-covered wire to the AM
terminal. (Keep the AM loop antenna
connected).
Snap the tabs on the loop into the
slots of the base to assemble the
AM loop antenna. FM Antenna (supplied)
AM Loop Antenna
(supplied)
If AM reception is poor, connect an
outdoor AM antenna(not supplied).