Spirit XT8 User Manual

Page 12

Advertising
background image

XT8 / XT10

11

RAPID SPEED KEYS:

5 preset buttons for rapid speed: 2Mph, 4Mph, 6Mph, 8Mph, 10Mph. You can press the 5 buttons,

mentioned above, at any time during a program and the treadmill will automatically adjust to the

preset speed.

RAPID INCLINE KEYS:

5 preset buttons for rapid incline: 2, 4, 6, 8, 10. You can press the 5 buttons, mentioned above, at

any time during a program and the treadmill will automatically adjust to the preset elevation.

PROGRAMS:

MANUAL

P0

Step 1. Press the Program up/down button to select Manual

P0

then press enter.

Step 2. The Time window will now be blinking 00:00.

You now have a choice to set one of three parameters as a target; either Time, Distance

or Calories. When you set one of these targets, the number in that window will count

down (the other two will count up from zero) and when it reaches zero the program

ends.

To set Time as a target, adjust the Time in the window to your desired setting and press

enter. If you want to set the Distance as a target, just enter zero for Time and the

Distance window will be blinking. Set the Distance to the desired setting and press enter.

The Calorie window will be blinking. If you want to set the Calories as your target, make

sure that you have entered zero for both Time and Distance, then set the Calories to the

desired setting and press enter.

Step 3. After setting a target, you may press Start to begin the program.

Step 4.

Press STOP button to stop your workout or pull safety key away from its position to

disable the computer and drive motor.

PRESET PROGRAMS (P1~P5)

Step 1. Press the Program up/down buttons to select P1 ~ P5, then press enter. Each program

has it s own preset speed and incline values. You can view the speed and incline

profiles using the Select button next to the display.

Step 2.

The Time window will be blinking 20:00. Set the count down time from 10:00 to 99:00

(default is 20:00) then press enter. You can adjust the Time by pressing FAST/SLOW

button. If you set the count down to 00:00 the console will count up from zero.

Step 3. The Speed window will be blinking, showing the maximum Speed. Each program has

various speed changes during operation and this number is the highest speed the

program will reach. You can adjust the maximum program speed to the fastest speed

Advertising
This manual is related to the following products: