Sanyo MPX-MD162 - Manual (Page 3)

CONTENTS
PARTS NAMES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
FRONT PANEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
REAR PANEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
CONNECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
BASIC CONNECTIONS . . . . . . . . . . . . . . . . . . . . . .5
CONNECTIONS TO THE ALARM IN AND
RS232C/RS485 TERMINALS . . . . . . . . . . . . . . . . . .6
REMOTE CONTROLLER CIRCUIT
CONNECTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
BASIC OPERATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . .8
MODE SWITCHING . . . . . . . . . . . . . . . . . . . . . . . . . .8
SECURITY LOCK FUNCTION . . . . . . . . . . . . . . . . .9
SETTINGS BACKUP FUNCTION . . . . . . . . . . . . . . .9
RESET FUNCTION . . . . . . . . . . . . . . . . . . . . . . . . . .9
LIVE PICTURE MODE . . . . . . . . . . . . . . . . . . . . . . . . . .10
FULL SCREEN OPERATIONS . . . . . . . . . . . . . . . .12
4 DIVISIONS SPLIT SCREEN OPERATIONS . . . .14
MULTI-DISPLAY SCREEN OPERATIONS . . . . . .15
PLUS-DISPLAY SCREEN OPERATIONS . . . . . . .15
MONITOR 2 OPERATIONS . . . . . . . . . . . . . . . . . . . . . .17
VCR PLAYBACK MODE . . . . . . . . . . . . . . . . . . . . . . . .18
FULL SCREEN OPERATIONS . . . . . . . . . . . . . . . .20
4 DIVISIONS SPLIT SCREEN OPERATIONS . . . .22
MULTI-DISPLAY SCREEN OPERATIONS . . . . . .23
PLUS-DISPLAY SCREEN OPERATIONS . . . . . . .23
MENU SETTING MODE . . . . . . . . . . . . . . . . . . . . . . . . .25
LANGUAGE SETTING . . . . . . . . . . . . . . . . . . . . . .26
CLOCK AND DAYLIGHT SAVING SETTING . . . . .27
VCR SETTING AND EXTERNAL CONTROL
COMMUNICATION SPEED SETTING . . . . . . . . . .29
ALARM AND SENSOR SETTING . . . . . . . . . . . . . .31
ACTIVE RECORDING AND VIDEO LOSS
SETTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
MONITOR SETTINGS . . . . . . . . . . . . . . . . . . . . . . .35
CAMERA SETTING . . . . . . . . . . . . . . . . . . . . . . . . .36
SETTING EACH CAMERA DISPLAY POSITION
IN SPLIT SCREEN DISPLAY MODE . . . . . . . . . . . .43
CLOCK AND TITLE DISPLAY SETTINGS . . . . . . .44
ALARM DATA DISPLAY . . . . . . . . . . . . . . . . . . . . .45
ALARMS OPERATIONS . . . . . . . . . . . . . . . . . . . . . . . .46
INTERFACE SPECIFICATIONS . . . . . . . . . . . . . . . . . .48
SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53
FEATURES
Using this unit you can display the live pictures from the
cameras in split screen display mode (16, 9 or 4 divisions) while
recording, and the recorded pictures can also be displayed in
split screen display mode.
• High-speed switching (up to single field switching)
• 1, 4, 9, 16 screens display modes, with possibility of
displaying an automatic sequential live or recorded pictures
display in the bottom right 1/4 of the screen while in 9 or 16
split screen display mode.
• Full screen display on monitor 2 and during alarms automatic
switching to the alarm screen.
• The following operations are possible at each camera
according to the timer settings:
• Programmed recording of certain or all cameras only can be
done according to the day or night periods.
• Different alarm durations of certain or all cameras can be set
according to the day or night periods.
• Live or recorded pictures of certain or all cameras can be
masked so they are not visible according to the day or night
periods.
• Automatic switching delay can be set for each camera
according to the day or night periods.
• Video sensor points areas can be set for each camera.
Trigger can start alarm recording operations in priority.
• If the video signal is interrupted at any of the cameras, the
frozen image just previous to the interruption or color bars
can be displayed (selectable for each camera).
• The unit can be controlled by computer through the RS232C
connection.
• A system controller (sold separately) can be used through the
RS485 (RJ-11) connection.
• 2 monitors output and S-VIDEO input/output (MPX-CD162
model only).
• Up to 100 alarm entries can be displayed on-screen.
ACCESSORIES
Power cord x1
Fixer
Power cord tie x1
To mount this unit onto a rack, please use the rack mount
hardware sold separately.
L8FC5/US (MPX-CD162, MD162 GB) 2000. 8. 31
2 English