Sharp AR-C160 - Manual (Page 127)

7-9
CHAPTER
7
20-BIN STAPLE SORTER (AR-SS2)
1 Open the stapler cover.
2 Lift the release lever and pull out the staple box.
● Lift the release lever to unlock the staple box. Then pull out the
box.
3 Remove the empty staple cartridge from inside the
staple box.
4 Insert the new staple cartridge into the box until it clicks
in place.
● Insert the new cartridge by aligning the arrows on the cartridge
with those on the box. Check that the cartridge locks in place by
pulling it slightly.
● The cartridge holds 5,000 staples.
NOTE:
Be sure not to remove the rear paper and tape before inserting
the cartridge.
Staple cartridge replacement
When the staple cartridge becomes empty, the message “ ADD
STAPLES. ” will appear. Replace the staple cartridge as follows:
OPTIONAL EQUIPMENT
20-bin staple sorter (AR-SS2)