Powering the transmitter, Eu uk us – Sennheiser 502873 User Manual
Page 14
13
Putting the RS 160 into operation
Powering the transmitter
For powering the TR 160 transmitter, you can use:
•
the supplied SSA-4P 5050F power supply unit for stationary use
•
rechargeable batteries (AA size, NiMH, 1.2 V, at least 1,300 mAh) for
mobile use
•
standard batteries (AA size, 1.5 V) for mobile use
Powering the transmitter via the power supply unit
̈
Select the suitable country adapter
ቩ
for your wall socket.
̈
Slide the country adapter
ቩ
onto the power supply unit
ቨ
until it locks
into place.
̈
Connect the connector
ቪ
of the power supply unit to the socket
ቤ
.
̈
Plug the power supply unit
ቨ
into a wall socket.
The transmitter switches on. The multi-function LED
ባ
flashes green
after 9 seconds. The transmitter is in enrollment mode.
AU
EU
UK
US
7
8
3
2
9
1s
0
You can also connect the charging cable
ቫ
to the connector
ቪ
of
the power supply unit to conveniently charge your headphones
(see “Charging rechargeable batteries in the headphones” on
page 16 ).