Selecting the input signal, Automatically sizing and centering the picture – Sony GDM-F400T9 User Manual

Page 9

Advertising
background image

9

GB

Selecting the input signal

You can connect two computers to this monitor using the HD15
and BNC connectors. To switch between the two computers, use
the INPUT button.

Press the INPUT button.

The input signal and corresponding input indicator change each
time you press this button.

Notes

• If no signal is input to the selected connector, the monitor automatically

switches to the other connector.

• If you restart the computer you want to view, or that computer is in

power saving mode, the monitor may automatically switch to the other
connector’s signal. If this happens, manually select the desired signal
using the INPUT button.

Automatically sizing and centering
the picture

You can easily adjust the picture to fill the screen by pressing the
ASC (auto sizing and centering) button.

Press the ASC button.

The picture automatically fills the screen.

Notes

• This function is intended for use with a computer running Windows or

similar graphic user interface software that provides a full-screen
picture. It may not work properly if the background color is dark or if
the input picture does not fill the screen to the edges (such as an MS-
DOS prompt).

• Pictures with an aspect ratio of 5:4 (resolution: 1280

Ч

1024, 1800

Ч

1440*) are displayed at their actual resolution and do not fill the screen
to the edges.

• The screen may go blank for a few seconds when the ASC button is

pressed. This is not a malfunction.

* GDM-F500T9 only

INPUT

HD15

BNC

ASC

Advertising
This manual is related to the following products: