Soleus Air KFHHP-22-ID - Manual (Page 17)

- 15 -
◆Installation
Wiring of indoor unit
Note: The power of indoor unit is supplied by the outdoor. A breaker needs to be installed for safety.
Operation Procedures:
1. Open the surface panel.
2. Open the cover and cover plate of electric
box. (Right figure)
3. Remove the receiving window as shown in
the below left figure.
4. Wire pipe should be tightened by the fixed nut and the electric box should be fixed as shown in the
above right figure and the below figure.
Shield cover (upper) of electric box must be grounded.