Sony RDR-GX700 - Manual (Page 44)

44
To confirm, change, or cancel timer recording
See “Checking/Changing/Cancelling Timer
Settings (Timer List)” (page 45).
To extend the recording duration time while
recording
1
Press TOOLS during recording.
The TOOLS menu appears.
2
Select “Extend Rec” and press ENTER.
3
Press M/m to select the duration time.
You can set the duration in increments of 10
minutes, for a maximum of 60 minutes.
4
Select “OK” and press ENTER.
One Touch Timer
If you use the SMARTLINK connection, you can
easily display the timer programming menu.
When the TV is turned on or in standby mode,
insert a disc and press [TIMER]. The recorder
automatically turns on and the TV’s input is
switched to the recorder. The Timer programming
menu appears.
z Hint
You can play the recorded programme by selecting the
programme title in the Title List menu.
Notes
• If “The disc is full or nearly full” appears on the screen,
change the disc, or make available space for the
recording (DVD+RW/DVD-RW only) (page 64).
• Check that the clock is correctly set before setting the
timer recording. If not, the timer recording cannot be
made.
To record a satellite programme, turn on the satellite
tuner and select the satellite programme you want to
record. Leave the satellite tuner turned on until the
recorder finishes recording. If you connect equipment
with a timer function, you can use the Synchro Rec
function (page 50).
• Even if the timer is set for the same daily or weekly
programme, the timer recording cannot be made if it
overlaps with a programme that has priority. “
” will
appear next to the overlapped setting in the Timer List.
Check the priority order of the settings (page 45).
• Even if the timer is set, timer recordings cannot be
made while recording a programme that has priority.
• The Rec Mode Adjust function only works with a timer
recording and the PDC/VPS function set to off. It does
not function with Quick Timer or Synchro Rec.
• The beginning of some recordings may not be made
when using the PDC/VPS function.
• You cannot extend the recording duration time when
“PDC/VPS” is set to “On.”
Recording TV programmes using the
VIDEO Plus+ system
The VIDEO Plus+ system is a feature that
simplifies setting the timer. Just enter the
PlusCode number listed in the TV programme
guide. The date, time, and channel of that
programme are set automatically.
Check that the channels are correctly set in
“Channel Setting” in Settings Setup (page 83).
1
Insert a recordable disc.
2
Press [TIMER].
• If the Timer programming (Standard) menu
appears, press < to switch the display to
“VIDEO Plus+.”
Extend Rec. Time
Set the timer extend function.
Tue 28.9 10:00-11:30 AAB SP
OK
Cancel
Extend Time
Off
1 2 3
4 5 6
7 8 9
0
< / M / m / , ,
ENTER
[TIMER]
Number
buttons, SET
x REC
STOP
CLEAR
Timer - VIDEO Plus+
Set the timer by entering the timer code.
Standard
PlusCode No. Cancel
OK