SBC comm 516 - Manual (Page 27)

Installation Guide for Customer Self-Install: Westell ® 516, Macintosh Page 26
©2001 SBC Advanced Solutions, Inc. All rights reserved.
APPENDIX D
Troubleshooting SBC Express
Please refer to this list if you are having problems using SBC Express or if you receive an error
message. If after troubleshooting, you are still having problems, then you should contact your
Internet Service Provider 'help desk' for further information.
Step Problem Solution
Minimum
Resources SBC Express verifies minimum requirements on
several resources including hard drive space, RAM,
operating system level, and processor speed and
family.
If any of these resources are under the required value,
an error will display describing which resource did not
meet the requirement.
Update your computer to the recommended
resource level.
Installing
Network
Interface Card When installing Network Interface Cards the
installation process may ask for the original installation
disk. You may have to provide an installation CD-
ROM for the installation of the drivers to be
successful.
Incompatible
Adapter This scenario can occur when a machine had a
previous NIC or Network Adapter installed, but the
physical device is missing or was misconfigured.
Use the “Fix” button to launch the appropriate
system control panel along with context sensitive
help. The help provided will guide you through
the steps to disable or remove the adapter.
Missing Internet
Protocol This scenario can occur if Client for Microsoft
Networks is not installed with the TCP/IP protocol or
if the NIC is installed without binding TCP/IP to the
NIC. Use the “Fix” button to launch the appropriate
control panel and context sensitive help to guide
you in binding TCP/IP to the network adapter.
Disabled
Network Adapter This scenario can occur when a NIC is present in the
system, yet the adapter has been disabled. Use the “Fix” button with context sensitive help
to guide you through enabling the adapter.