Sanyo VPC-S1085 - Manual (Page 29)

EN-28
Protecting Images
Set the data to read-only to prevent images from being erased by mistake.
1. Press the
button.
„ The last image appears on the screen.
2. Select the image that you want to protect with the e /
f buttons.
3. Press the button.
4. Select [Protect] with the c / d buttons, and press the
button.
5. Select [Single] or [All] with the c / d buttons, and
press button.
6. Select [Set] with the c / d buttons, and press the
button.
„ Protection is applied to the image and the camera
returns to the playback mode.
„ The protect icon [ ] is displayed with protected
images.
When [All] has been selected, [ ] is displayed
with all the images.
Canceling the Protection
To cancel protection for only one image, display the
image on which you want to remove the image
protection.
1. Press the
button.
„ The last image appears on the screen.
2. Select the image that you want to cancel protection with the e / f buttons.
3. Press the
button.
4. Select [Protect] with the c / d buttons, and press the button.
5. Select [Single] or [All] with the c / d buttons, and press the button.
6. Select [Cancel Protect] with the c / d buttons, and press the button.
„ The removal of image protection is executed and the camera returns to the
playback mode.
„ Formatting an SD/SDHC memory card overrides protection, and erases all images regardless of
their protected status.