Sony MZ-NHF800 - Manual (Page 73)

73
1
Enter the menu and select “Option” -
“QuickMode”.
2
Turn the jog dial until “Quick On”
appears in the display, and then press
NENT to enter the selection.
Selecting the disc
mode (Disc Mode)
When you insert a 60/74/80-minute
standard disc (blank) into the recorder,
you can use this function to specify use of
the disc in Hi-MD mode or MD mode.
If you want to use the disc recorded on
this unit on another component that does
not support Hi-MD, record the disc with
“Disc Mode” in the menu set to “MD”.
1
Enter the menu and select “Option” -
“Disc Mode”.
2
Slide the jog lever repeatedly until
“Hi-MD” or “MD” appears in the
display, and then press the jog lever to
enter the selection.
• Even if you select “MD” as the “Disc Mode”
setting, the operation mode can only be “Hi-
MD” when using a 1GB Hi-MD disc.
• The operation mode set in the “Disc Mode”
menu is applied to a blank 60/74/80-minute
standard disc used on the recorder even if a
different operation mode was selected in the
SonicStage software or a different operation
mode appeared on the display after the disc
was formatted by the SonicStage software.
1
Enter the menu and select “Option” -
“Disc Mode”.
2
Turn the jog dial until “Hi-MD” or
“MD” appears in the display, and then
press NENT to enter the selection.
On the recorder
5-way control key
(NENT)
NAVI/
MENU
Jog dial
DISPLAY
Jog lever
Notes
On the recorder
5-way control key
(NENT)
NAVI/
MENU
Jog dial