Sony Ericsson GC89 - Manual (Page 108)

108 Appendix B - Changing the GC89 Wireless LAN Adapter Properties
Power Output Sets the percentage of the maximum available output power to be used.
Power Save
Mode This is used to put the GC89-enabled computer into the IEEE 802.11
Power Save mode. In Power Save mode, the radio is periodically powered
down to conserve power. When in Power Save mode, packets are stored
in the AP until the PC comes on.
RTS Threshold If the number of frames in the data packet is at or above the RTS
Threshold, a request to send/clear to send handshake is turned on before
sending the data packet. The default value is 2347.