Setup menu 1, Eyepiece sensors (127), Setup menu – Sony A900 User Manual
Page 127: Lcd brightness info.disp.time, Power save
Setup menu
127
Setup menu
Setup menu 1
You can adjust the brightness of the LCD monitor.
Adjust the brightness with b/B on the multi-selector, then press
the center of the multi-selector.
• On the recording information or playback screen, you can adjust the
brightness by pressing the DISP button a little longer.
Note
• Regardless of the setting in this menu, the eyepiece sensors below the viewfinder
turn off the LCD monitor while you are looking into the viewfinder.
You can set the time to turn the camera to the power saving mode (Power
save). Pressing the shutter button halfway down returns the camera to the
shooting mode.
Note
• Regardless of the setting here, the camera turns to power save mode after 30 minutes
when the camera is connected to a TV or the drive mode is set to
(Remote
Commander).
LCD brightness
Info.disp.time
1 min
Displays for the amount of time you select.
30 sec
10 sec
5 sec
Power save
30 min
The camera turns to power save mode after the selected time
has elapsed.
10 min
5 min
3 min
1 min